|
Floriani Heat N Gone Stabilizer is a heat removable topping and stabilizer. It is essential to use as a topping on piled fabrics to prevent stitches from disappearing into the pile. Perfect to use as a stabilizer when you don't wish to wash the project before giving as a gift or when the fabric cannot withstand moisture.
10" x 25yds
To use as a topping:
-
Place a piece of Heat N Gone on the surface of the hooped item, bumpy side touching the fabric and secure the outer corners with pins or tape to prevent curling.
-
Complete the embroidery design.
-
Tear away as much of the Heat N Gone as possible.
-
Place your heated iron directly on top of the garment to remove the excess stabilizer. Be sure your iron temp is at least 260° F (120°C). This temperature should be similar to a high wool setting on most household irons.
**Stainless Steel Iron recommended for best results.
To use as a stabilizer:
-
Place a piece of Heat N Gone within the hoop with the item to be embroidered. Use a piece at least one inch larger than the outer perimeter of the hoop and place the bumpy side of the stabilizer against the fabric.
-
Embroider the design.
-
Tear away as much of the Heat N Gone as possible.
Place your heated iron directly on top of the garment to remove the excess stabilizer. Be sure your iron temp is at least 260°F (120°C). This temperature should be similar to a high wool setting on most household irons.
|
|
Quick Links 
