|
|
 Remove two screws that hold plastic blade assembly
cover to the My-T-Fine Cutter. |
|
|
Remove screw and lock washer that attaches bottom blade
to the My-T-Fine Cutter. |
|
|
Remove blade assembly by lightly pulling up and away
from the My-T-Fine Cutter body. |
|
|
Remove rear plastic blade assembly cover by pulling
out and away from the My-T-Fine Cutter body. |
|
|
Replace rear plastic blade assembly cover by alligning
bottom plastic post with post hole on the My-T-Fine Cutter body. |
|
|
While holding both the My-T-Fine Cutter body and rear
plastic blade assembly cover in place, replace old blade assembly with the
new blade assembly making sure to align the larger hole onthe bottom blade
assembly with screw post hole and the smaller hole on bottom blade assembly
with the plastic post. |
|
|
Replace screw and lock washer that attaches bottom
blade to the My-T-Fine Cutter making sure to tighten screw securely to the
screw post hole. If screw is not fastened securely, blade will vibrate vigorously
and may cause damage to the screw post and My-T-Fine Cutter. |
|
|
Replace two screws that hold blade cover to My-T-Fine
Cutter. |
Quick Links 
